Publicidad
Idiomas disponibles
Idiomas disponibles
2
www.mopar.com
1. Remove accelerator pedal using 10mm socket.
Replace production pedal with your new Mopar pedal
(shown). Re-use the mounting hardware. Tighten to 11
+/- 1 Nm.
2. Repeat for brake and clutch pedals using 13mm
socket. Tighten to 13 +/- 1 Nm. The brake and clutch
pedals look similar, take care when installing.
3. Note where the footrest is positioned for your comfort.
Remove the locking nut using a 13mm socket. Replace
production footrest with your new Mopar footrest
(shown). Adjust position as desired and tighten to 10 +/-
2 Nm.
June 14,2013
K6861630
Publicidad
