Information And General Rules; Marking And Identification; Important; Explanation Of Symbols - Bertolini 401 Manual De Uso Y Mantenimiento

INFORMATION
AND GENERAL RULES
SPARE PARTS - You are highly recom-
mended to use only GENUINE SPARE
PARTS. Orders must be made obser-
ving the rules given in the Spare Parts
Catalogue.
ENGINE SERVICING - The regulations
for using and servicing the engine are
given in the appropriate booklet, a copy
of which is provided with each machine.
NOTE - The terms RIGHT and LEFT
used in this manual to locate the various
components always refer to the normal
travel direction of the vehicle, that is to
the machine seen by the operator in the
driver's position and with the Mower
mounted as an accessory of normal use.
The abbreviation 1+1 indicates the mo-
del with two gears, one forward and one
reverse.
The abbreviation 2+2 indicates the mo-
del with four gears, two forward and two
reverse.

EXPLANATION OF SYMBOLS

Throttle Control
Clutch control
Direction of travel
CE PLATE

MARKING AND IDENTIFICATION

The Machine's serial number is printed
on the top of the gearbox. The "CE" mark
on the column support.
On receiving the machine check for the
CE label.

IMPORTANT!

Whenever requesting technical ser-
vice or ordering spare parts, always
give the serial number of the machi-
ne in question.
32
SERIAL NUMBER