Deleting Data - LaserLiner ThermoSpot-Vision Manual De Instrucciones

13
An overview of all recorded data, divided into images, videos and log les is shown after selecting "Gallery"
mode. Con rm the required selection with "ENTER" and show a preview of the le on the display.
Images: Preview on display
Videos: Video sequence starts automatically
Logs: Scroll along X-axis with

Deleting data

1. Select le with "ENTER"
2.
Press "ENTER"
3a. Delete image:
3b. Cancel:
14 Connecting Type-K thermocouple
15 Reset
16
Dual laser / 50:1 optics
The dual laser marks the area on the surface where the
temperature is measured using the infrared function.
The size of the measurement area is in relation to the
distance. The greater the distance to the measured
object, the greater the measurement area. With this
device the ratio between the distance and measurement
area is 50:1.
! The target object must be within the measurement area. The determined temperature is the
average temperature of the measurement area.
18 GB
Gallery
/
Connect corresponding Type-K thermocouples at the bottom of the
device. To show the temperature of the thermocouple in the display,
enable the "Type-K" option in the measurement settings (see Point 8).
The temperature is shown with the abbreviation "TK" on the display.
Pay attention to the polarity information and the correct type
!
class (Type K) on the thermocouple as well as on the device
connection.
The device can be reset to the factory setting if it no longer responds
if a button is pressed or can no longer be switched on or off. Press
the pushbutton by inserting a thin, pointed object in the opening at
the bottom of the device.
Laser Infrared
1,25 m Fokus
5 m