Morphy Richards TURBOSTEAM 40659 Manual De Instrucciones página 3

• Do not allow the cord to touch hot
surfaces. Let the iron cool
completely before putting away.
Loop cord loosely around the iron
before storing.
Other safety
considerations
• Use the iron only for its intended
use.
• Always disconnect the iron from the
electrical socket when filling with
water or emptying, and when not in
use.
• Do not operate the iron with a
damaged cord or if the iron has
been dropped, damaged or leaking.
To avoid the risk of electric shock,
do not disassemble the iron, but
telephone Morphy Richards for
advice. Incorrect reassembly can
cause a risk of electric shock when
the iron is used.
• IMPORTANT: When not in use, the
iron should never be left flat on an
ironing board.
• If you drop or severely knock your
iron this could cause internal
damage even if the outside appears
alright. Have it checked by a
qualified electrician.
• To prevent damage to a textile
being ironed, follow the temperature
guide carefully and test the inside of
the hem of the garment.
• When placing the iron on its heel,
ensure that the surface on which
the heel is placed is stable
Electrical requirements
Check that the voltage on the rating
plate of your appliance corresponds
with your house electricity supply
which must be A.C. (alternating
current).
If the socket outlets in your home
are not suitable for the plug
supplied with this appliance the
plug should be removed and the
appropriate one fitted.
WARNING : The plug removed
from the mains lead, if severed,
must be destroyed as a plug
with a bared flexible cord is
hazardous if engaged into a live
socket outlet.
Where used, should the fuse in the
13amp plug require changing,a 13
amp BS1362 fuse must be fitted.
WARNING: This appliance must
be earthed.
Components
⁄ shot-of-steam button
¤ Spray button
‹ Variable steam control
› Filling hole with cap
fi Spray nozzle
fl Soleplate
‡ Illuminated temperature
control dial
· Water tank
‚ Life long anti-scale
(certain models only)
„ Power on indicator lights -
Auto shut-off indicator
(certain models only)
‰ Filling beaker
Filling with water
1 With the iron disconnected from the
mains supply, set the variable steam
control ‹ to the 'O' position.
Lift up the fill cap › and using the
2
beaker provided fill the iron with
water B.
• One beaker fills the tank (400ml).
3 Replace the fill cap.
4 Always pour out the remaining
water after use.
In hard water areas the use of
distilled or demineralised water is
recommended.
IMPORTANT: Never use battery
topping up fluid or water containing
any substances like starch, or sugar,
or defrosted water from a
refridgerator.
WARNING: When filling the iron
with tap water always use the
beaker provided. Never fill
directly under the tap.
g
3