2
BASIC OPERATION
This chapter addresses and explains the basic features for
TM
JEST
including:
Turning the phone on/off
Accessing the menu
Using the Task Bar
Quick switching between the main
menus
Menu summary
Making a call
Answering calls
Missed Call notification
Wait/Pause feature
Making an international call
3-way calling
Call waiting function
Calling a number from contacts
Adjusting volume
Caller ID function
Vibrate mode
Speakerphone mode
Using auto keypad lock function
Available options during a call
Making an emergency call
Dialing Letters
TURNING THE PHONE ON/OFF
TURNING THE PHONE ON
1. Press and hold the END Key
until the display turns on.
• If
"ENTER LOCK
CODE" appears on the display, press the OK Key to unlock the keypad,
and enter your 4-digit lock code.
• The default lock code is the last 4 digits of your phone number.
TURNING THE PHONE OFF
1. Press the OK Key to unlock the keypad, then press and hold the END Key
until your display turns off.
• Immediately change or recharge the battery when
display. Memory may possibly be damaged if the phone turns off due to the battery
completely draining.
• Turn the phone off before removing or replacing the battery. If the phone is on,
unsaved data may be lost.
ACCESSING THE MENU
Your phone can be customized via the menu. Each function can be accessed by pressing
the Directional Key
or by pressing the number that corresponds with the menu
item.
1. To access the main menu from idle mode, slide the phone up and press the OK
Key [MENU].
2. To scroll through the menu, press the Directional Key
the number that corresponds to the desired menu item.
3. To return to the previous page, press the CLR Key
and return to idle mode, press the END Key
4. From idle mode, press the OK Key to unlock the keypad, then press the Left Soft
Key [
] [Message] to open the Messages menu or press the Right Soft Key
[
] [Contacts] to open your Contact List.
"BATTERY
LOW" appears on the
up or down or press
. To exit the current menu
.
21