Handset Group Subscription; Call Transfer - EnGenius EP800 Manual De Instrucciones

registration, the handset display will show "Please
register".
Notes:
1. The base station has a 30 second registration timeout starting
from pressing the PAGE button. The handset has a 6 second
registration timeout starting from the registration or de-
registration option has been selected. The base station and
handset will automatically exit registration mode after timeout.
2. Repeat registration or de-registration process if unsuccessful.

Handset Group Subscription

1. Up to nine handset groups (91-99) can be defined and
handsets can decide which group(s) they want to be
in.
2. For example, Group 1 represents the Customer
Service Group, Group 2 represents the Sales Group,
and Group 3 is the Marketing Group. Suppose that
Handset 11 wants to receive incoming rings for all
Sales and Marketing related calls. Then handset 11
will need to "subscribe" to Group 2 and Group 3.
3. Group Selections:
a. Press handset MENU-4 to enter the Call Settings
menu
b. Press number "2", handset enters group setting
menu.
c. Press OPTION soft key and followed by "1" key to
subscribe the group ("9＃", ＃:1~9). Enter 1~9.
d. Repeat for all desired groups.
e. Delete group selections by pressing
key and followed by "2" to Unsubscribe the group.
Notes:
Call Settings
2.Group Setting
SELECT
OPTION soft
~37~
1.
2.
3.

Call Transfer

While a telephone call is in progress, you can transfer it between different
handsets.
Direct transfer
1. Press OPTION
2. Press XFER
destination handset ID, then the held call will be
transferred directly.
After the call transferred to destination handset, the
original handset will go back to standby mode
automatically.
BACK
Indirect transfer
If you want to talk to the destination handset before the
call transferred, you can follow with below method:
1. During the call, press
the destination handset ID.
2.
Press the
the intercom call, you can now talk to the destination
handset. After the talking, press
intercom call, then the destination handset is able to
pick up the incoming call automatically.
After the call transferred to destination handset, the
The handset can change group affiliations at any time.
The base station is not responsible for group assignments.
Consequently, it cannot de-subscribe a handset from a group.
When an intercom caller enters a group ID, all handsets
subscribed to this group will ring. The first handset to answer will
establish a link with the caller. Afterward, it is a one-to-one call,
not a one-to-many call.
(Left) soft key to put the call on hold.
(Right) soft key, followed by the
key, followed by entering
of the destination handset to answer
to end the
~38~