Publicidad
The cursor is used to check selected patterns,
insert patterns, delete patterns or editing of each
pattern as described below.
If the settings of the highlighted pattern can be
changed, it will be noted in the center line of the
LCD.
C. TO CHECK SELECTED PATTERNS
As the length of the string increases, patterns will
disappear from sight.
You can check patterns by shifting cursor to the
left.
D. INSERTING PATTERN
1. Machine will insert a pattern to the left of the
highlighted letter or pattern.
2. Using the cursor buttons, move the cursor to
highlight the pattern just before the desired
position for the new pattern. Select the pattern.
E. TO DELETE PATTERN
1. Shift the cursor to the pattern you want to
delete.
2. Press the Edit button. LCD will change to the
editing mode.
a. When the cursor is at furthest right side,
machine will shift just before pattern.
3. Press the delete button (F2) button quickly (less
than 0.5 sec.).
Machine will delete the pattern and cursor will
shift to next pattern.
4. If you want to delete all patterns, press and hold
the clear "C" button (over 0.5 sec.).
Machine will delete all selected patterns and
return to selection mode.
5. After the deleting, press the return button (F1)
or Edit button. Machine will return to selection
mode.
90
C
D
E
Publicidad
Capítulos
