Wiring Diagram - Toshiba RAS-M10SMUV-E Manual De Instalación

Wiring
1. Remove a screw and then remove cover of the electric parts box.
2. Strip wire ends (10 mm).
3. Match wire colors with terminal numbers on indoor and outdoor units' terminal blocks and firmly screw wires to the corresponding
terminals.
4. Connect the ground wires to the corresponding terminals.
5. Fix the wires with cord clamp.
6. Fix cover of the parts box and the terminal block surely with the fixing screws.
Make a loop on the wire for margin of the length so that the electric parts box can be taken out during servicing.
NOTE
2
Wire type: 1.0 mm (H07RN-F or 60245IEC66)

Wiring diagram

EN
Earth line
Connecting wire
Indoor side
Indoor/Outdoor
connecting wires
Outdoor side
20