Altrex RS TOWER 34 Manual Del Usuario página 15

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
Index
1.
General
2. Type of rolling tower
3. Safety instructions
4.
Parts
5.
Mounting instructions
6. Assembly
7.
Check before use
8.
Moving the rolling tower
9. Disassembly of the rolling tower
10. Inspection, Care and Maintenance
11. Warranty conditions
12. Abbreviations and logos
1. General
This manual applies exclusively to folding and rolling tower configurations (hereinafter: 'the scaffold) as described in this assembly
& user manual (hereinafter: 'the manual').
Prior to starting to assemble the tower, you should carefully read this manual. The required tower should be assembled and used in
accordance with this manual.
Reading Instruction
The manual refers to annexes. These annexes appear at the front of the manual and are indicated by the letter T followed by a
number.
Examples of notations used for references to annexes
T1
(Part T2.A)
[T3.6 - T3.8]
[T4.1]
And so on
WARNING:
a fall from scaffolding can cause serious injury or death. All instructions in this manual have to be strictly adhered to.
If the instructions contained in this manual are not followed, accidents may arise. Altrex may not be held liable for any damage as a
result of non-compliance with the guide regarding the assembly and use of the Altrex chimney scaffold.
The employer, supervisor and user are responsible for the correct use of the container stairs in accordance with this manual and they
must ensure that this manual is available at all times when work is being carried out using the container stairs. Additional copies of
the manual can be ordered from Altrex.
Note:
The manual must be available with the scaffold during assembly and use.
!
The scaffold may only be assembled and used in accordance with this manual without making any modifications.
Scaffolding may only be assembled and used in accordance with local laws and regulations. Local legislation and regulati-
ons may contain supplementary measures on top of this guide.
Make sure you are familiar with the assembly and use of the rolling tower. Study the manual carefully and follow specific
training if necessary.
Employees charged with conversion, maintenance, repair or cleaning must have specific expertise and experience in
accordance with national (working conditions) legislation.
A product training course does not replace a manual but gives additional explanation.
2. Type of rolling tower
Norm
Category
Access category
Maximum platform height outdoors
Maximum platform height indoors
Maximum platform load
Maximum load on rolling tower
Maximum number of persons per platform
Maximum wind load in operation
Maximum wind load when moving
Minimum number of assembly persons
* 6 Beaufort: Umbrellas struggling to hold on to, trees moving, flags taut, larger waves with white crests, drifting water.
Annexes
T1. Icons
T2. Parts
T3: Mounting instructions
T4. Assembly steps
T5. Configuration table and assemblies
Annex T1
Annex T2, part A
Annex T3, figure 6 to 8
Annex T4, figure 1
RS TOWER 34
EN1004-1
2-H2
XXXX
5.8 m
5.8 m
150 kg
300 kg
1
12,7 m/s (max. 6 Beaufort)*
12,7 m/s (max. 6 Beaufort)*
2
15
www.altrex.com
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido