Kathrein UFO 386/TP Manual De Instrucciones página 19

1. Configuration of the channel unit
The selection of input connector A or B as well as the switching off of the channel unit is effected in the input submenu.
In the output submenu, it is possible to set the level but not to switch it off.
Access the submenu by pressing the
Input 1568
27,500 MS/s
Output S21
6,875 MS/s
Main menu
The desired parameter is selected using the "y y " or "z z " key.
With the key "+" or "–" the input of the channel unit can be assigned to input connector A or B.
With the key "+" or "–" the output of the channel unit can be switched on or switched off.
With the key, exit from the submenu is possible.
2. Selecting the input frequency
Input 1568
27,500 MS/s
Output S21
6,875 MS/s
Main menu
The input frequency is selectable in 1 MHz steps between 950 MHz and 2150 MHz with the "+" or "–" key.
Changing the entry by numeric character entry is also possible :
● Press and release the "y y " and "z z " keys at the same time (mode starts).
● Select the position with the "y y " and "z z " keys (the selected position flashes).
● Set the position with the "+" or "–" key. Proceed in the same fashion to select all other digits.
● Press and release the "y y " and "z z " keys at the same time (mode ends).
SNR display
In the submenu for the parameter "Input frequency", the SNR of the SAT input signal is displayed, provided the channel
unit has snapped in (all parameters must have been set and the indicator "
After the parameter "input frequency" has been selected, the submenu can be activated by pressing the
key and deactivated by pressing
For failure-free operation in processing systems it is recommended : SNR > 12 dB
Input 1568
27,500 MS/s
Output S21
6,875 MS/s
Main menu
key.
MHz *
3/4
306,00 MHz
64 QAM
MHz *
3/4 TP
306,00 MHz
64 QAM
once again.
MHz
3/4 TP
306,00 MHz
64 QAM
*** UFO 386/TP
Input
Output
< Return:
Submenu input
15 6 8
Input
27,500 MS/s
Output S21
6,875 MS/s
Display for entry by digits
*
" must not flash).
*** UFO 386/TP
SNR = 12,6 dB
< Return:
Submenu Input frequency
***
A
on
Submenu >
MHz *
3/4 TP
306,00 MHz
64 QAM
***
Submenu >
3