Kathrein UFO 386/TP Manual De Instrucciones página 28

In order to achieve faultless operation with the highest probability, we calculate a suggested bandwidth setting, which serves as
a setting guide. This value is made topical with the aid of a tow pointer as long as the submenu shows the output bandwidth.
Procedure : The suggestion should be observed for a total of approximately 2 minutes.
The bandwidth then set should be equal to or bigger than the bandwidth suggested.
12. Settings on system level
Utilisation of the control bus demultiplexer UFX 312 (Order No. 20610040) is required for the settings on
system level.
Access to the central control unit is possible with the keys (<< >>). The procedure is the same as the one used
for setting channel units. If the central unit is addressed, the yellow LED will be lit.
Setting the language
* * * *
Language setting
Choice
Main menu
The (+) and (–) keys allow for selecting between the following functions
●
Set language
●
Version number
●
Cable NIT
The desired function is activated with the
Parameters in the submenu are selected with the (< >) keys. Values are changed with the keys (+) and (–).
Selecting the version numbers
* * * * System
Version number
Selection
Main menu
Setting for cable NIT
* * * * System
Cabel NIT
Selection
Main menu
12
Suggestion : measured max. bandwidth x 1.25.
System * * * *
with + / -
German, English, French
Display of bootloader version, Control
ON/OFF, build-up, network name, network ID
key.
* * * *
with + / –
* * * *
with + / –
* * * * Language
German
< Return:
Submenu language
* Version number *
Bootloader
Control
< Return:
Submenu version numbers
* * * * Cable NIT
NIT
Network
< Return:
Submenu cable NIT
* * * *
Submenu >
V2.00
V7.00
Submenu >
* * * *
ON Build-up
Name ID
Submenu >