Kathrein UFO 386/TP Manual De Instrucciones página 32

Set-up of the integrated CAT:
Syntax
table_id
section_syntax_indicator
‚0'
Reserved
section_length
Reserved
version_number
current_next_indicator
section_number
last_section_number
Descriptor_tag (= 0x09
Conditional Access Descriptor)
Descriptor_length
CA_system_ID
Reserved
CA_PID
Private Data
CRC32
2. Operating the programme filter with USW 30 (PID-List)
In conjunction with USW 30, it is possible to process the PIDs removed from the data stream when
the programme filter is switched on.
It is possible to add or erase PIDs. The input is effected in hexadecimal format.
●
Notes : The PID list is erased if the PRG filter is built up again !
●
The PIDs 0x0000-0x001F cannot be removed from the data stream.
Electronic equipment is not household waste - in accordance with directive 2002/96/EC
OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 27th January 2003
on used electrical and electronic equipment, it must be disposed of properly.
At the end of its service life, take this unit for disposal at a relevant official collection point.
Internet : http://www.kathrein.de
KATHREIN-Werke KG · Anton-Kathrein-Str. 1–3 · P. O. Box 10 04 44 · 83004 Rosenheim / Germany · Tel. +49(0)80 31/ 184 0 · Fax +49(0)80 31/ 184 306
No. of bits
8
1
1
2
12
18
5
1
8
8
8
8
16
3
13
32
The following parameters (input in hexadecimal format)
can be modified :
●
CA_System_id
●
CA_PID
●
Private_Data (max. 100 Bytes)
Attention :
If the SAT-CAT (z.B. CA_PID) is modified, there is no
automatic take-over of the parameters. Input of the
new parameters must be effected manually.