Technical Specifications - TRAPP Master 500L Manual De Instrucciones

How to trim and cut the grass
✔
Carefully check the area where the
equipment will be used.
✔
Remove all stones, pieces of wood, wires,
bones, glass and other weird objects that
may cause an accident during the use of
the equipment.
✔
For your safety, wear goggles, adequate
clothing and shoes.
1 - Hold the trimmer or lawn mower in
suspension with one hand and with the
other press the trigger. For better
performance, whenever possible, move
the trimmer or lawn mower from right
to left.
2 - Keep an adequate height in relation to
the ground.
3 - If the grass is very high, cut it in turns to
avoid overloading the equipment.
Table for the Correct Use of the Extension Cord
MASTER 500L/600 TRIMMERS AND MASTER 700/800 LAWN MOWERS
Length in meters
Voltage
Gauge (Ø) in A.W.G.
Gauge (Ø) in mm
Voltage
Gauge (Ø) in A.W.G.
Gauge (Ø) in mm
Model Motor
Master 500L Single 110/127 V
220/230 V Universal 500 W
phase
Master 600 Single 110/127 V
220/230 V Universal 600 W
phase
Master 700 Single 110/127 V
220/230 V Universal 700 W
phase
Master 800 Single 110/127 V
220/230 V Universal 800 W
phase
Master 500L and 600 trimmers should be used for garden finishing, near flower beds
and trees, among plants and flowers, near sidewalks, walls and other obstacles. Master
700 and 800 lawn mowers are used for the functions mentioned above as well as to cut
grass in areas up to 50m
10 20
18 16
0,75 1,0
18 18
0,75 0,75

Technical Specifications

Voltage Type Power
.
2
✔
Cuts in alignment are used to trim the
grass that grows over sidewalks and
driveways. Tilt the trimmer or lawn mower
and cut above the paved area.
30 40 50
110 / 127 Volts
14 14 14
1,5 1,5 1,5
220 / 230 Volts
16 16 16
1,0 1,0 1,0
Cutting Nylon Line
Range (Ø) Thickness (Ø)
240 mm 1,6 mm
240 mm 1,6 mm
290 mm 1,8 mm
290 mm 1,8 mm
60 70 80
12 12 12
2,5 2,5 2,5
14 14 14
1,5 1,5 1,5
Nylon Line
Length
6 m
6 m
8 m
8 m
90
12
2,5
14
1,5
27