Commissioning; Alignment; Check The Application Conditions - SICK GRTE18V Instrucciones De Operación

7

COMMISSIONING

7 Commissioning
7.1

Alignment

7.2

Check the application conditions

8
Align the sensor with the object. Select the position so that the red emitted light beam
hits the center of the object. You must ensure that the optical opening (front screen) of
the sensor is completely clear
Align the sensor with the object. Select the position so that the infrared light (not
visible) hits the center of the object. The correct alignment can only be detected via
the LED indicators. See figure 2
(front screen) of the sensor is completely clear.
Figure 2: Alignment
Check the application conditions: Adjust the sensing range and the remission capability
of the object according to the corresponding diagram
y = operating reserve).
During this process, an object can only be detected in front of a background if the
remission capability of the object is significantly higher than that of the background or if
the distance between the object and the background is sufficiently long.
Operating reserve
100
1
10
2
3
1
0 200 400 600
(7.87) (15.75) (23.62)
Figure 3: Sensing range of up to 1,000 mm
[see figure 2].
and table 2. You must ensure that the optical opening
Operating reserve
100
10
1
mm 100
(inch) (3.94)
Figure 4: Sensing range of up to 550 mm
800 1,000
(31.5) (39.37)
Distance in mm (inch)
[see figure 3]. (x = sensing range,
1 2 3
200 300 400 500
(7.87) (11.81) (15.75) (19.69)
Distance in mm (inch)
8021181.1ABM / 2020-12-21 | SICK
Subject to change without notice
600
(23.62)