Delivery Check - teutonia Trio Manual De Instrucciones

EN
1. Check that the following items are present in the correct numbers:
2 x U-bows (Plastic support part for Pram Body)
1 x Hood
1 x Folded Chassis
2 x Front wheels
2 x Rear wheels
1 x Matress
1 x Pram Body including Thermo Base
1 x Seat Unit Fabric including Seat Board
2 x Rear Axle Pin
2 x Adaptors for seat unit
2 x Adaptors for pram body
1 x Bumper Bar
2. Check the functions of the chassis/seat unit/Pram Body
Unfold the chassis.
Check the function of the chassis , that the 2 white lines are in a horizontal continuous
straight line on both sides
Check that the seat/Pram Body click on the chassis and it locks on both sides.
Check the 5 point safety harness on the seat unit by checking that it locks into place.
Check the telescopic height adjustment by lifting/pulling the handle up and down, the
handlebars should be checked that they lock in each position.
Check that the back rest can be adjusted and locked into each position.
3. Wheels and brakes
Lubricate the ends of the axles.
Attach the wheels and make sure that the wheels lock into position.
Check that the parking device locks both rear wheels when engaged.
4. Overall inspection of the product
Check that all rivets, screws and nuts are securely fastened.
Check that all press studs and zips on the seat fabrics and the tray/basket are cor-
rectly and securely attached.
Make sure that there are no other visible differences on the chassis, seat fabrics, tray/
basket and wheels.
48

Delivery Check

Teutonia TRIO
Teutonia TRIO, v.1.1