Mitsubishi Electric PAR-U02MEDA Manual De Instrucciones página 14

6 Important
■ Discrepancy between the room temperature measured at the wall and the actual room
temperature may occur.
If the following conditions are met, the use of the temperature sensor on the indoor unit is
recommended.
• Air distribution in the space is poor.
• There is a great discrepancy between the wall temperature and the actual room temperature.
• The back side of the wall is directly exposed to the outside air.
NOTE: When temperature changes rapidly, the temperature may not be detected
accurately.
■ Refer to the following manual for temperature sensor setting: indoor unit Installation
Manual for City Multi.
■ At the time of factory shipment, protective sheet is on the operation interface of the front
cover.
Peel off the protective sheet on the operation interface prior to use.
– 13 –