Mitsubishi Electric PAR-U02MEDA Manual De Instrucciones página 18

Item Detail
(1) Setup (j) LED color
adjustment
(k) Reset RC
(l) AHC port
name *4
(2) Error (a) Self check
menu
(3) Test run
*1 This setting will not become effective if the temperature sensor on the indoor unit is activated.
*2 The LED indicates the operation status of air conditioning units in colors. Refer to "LED Indicator" in
the instructions book.
*3 All settings information will be cleared to the default.
*4 AHC port name will not appear if no AHC unit is registered in the group.
[Data backup during power failure]
All the data for items except items (1)-(k) Reset RC and (3) Test run are nonvolatile, and will be
backed up even during power failure.
Data for items (1)-(a), (b), (c), (i), and (2)-(a) will be backed up on the air conditioning unit side.
Description
Adjusts the LED indicator color.
Use to initialize the memory on
the controller. *3
Use to customize the AHC port
names (max. 20 characters).
These names can be reset to
the default names.
Use to check the error history of
the desired unit and to reset the
error history.
Use to test the air conditioning
units. (Except AHC)
Liquid pipe temperature of
indoor unit will appear during
the test run. The test-run will
automatically end in two hours.
– 17 –
Setting
Sets the R (Red), G
*2 (Green), B (Blue) color
ratio.
Touch the Reset button. –
Set button: Jumps the
screen to the AHC port
renamed screen.
Reset button: Changes
all the port names to
the default names.
Sets the monitor targets
and displays error history.
Reset button: Deletes
the error history.
Test-run
Displays the liquid pipe
temperature of the
indoor unit at the
specified address.
Default
Blue: R, G, B=0, 0, 100
L.Blue: R, G, B=0, 40, 60
Purple: R, G, B=40, 0, 100
Red: R, G, B=100, 0, 0
Pink: R, G, B=80, 20, 40
Orange: R, G, B=100, 40, 0
Yellow: R, G, B=60, 80, 0
Green: R, G, B=0, 100, 0
Lime: R, G, B=40, 100, 0
White: R, G, B=80, 100, 40
Blank
–
–