Phonic HELIX BOARD 18 FIREWIRE MKII Manual Del Usuario página 16

Macintosh OS X (10.3.5 or later)
The Helix Board 18 FireWire MKII works with the primary audio drivers of Macintosh OS X 10..5 and later. First verify that you are run-
ning Macintosh OS X 10..5 or above, then connect the Helix Board 18 FireWire MKII to a FireWire port to the computer. To ensure your
Helix Board 18 FireWire MKII is working, enter the Utilities folder and double-click the Audio MIDI Setup icon.
Enter the Audio Device's section. From the "Properties for" pull-down tab,
select Helix Board 18 FireWire MKII.
At the bottom of the window, users can edit the setup of the Helix Board 18 FireWire MKII.
Properties such as sampling rate and clock source can be altered.
Users may also opt to make the Helix Board 18 FireWire MKII their default input and/or output device.
Mac users are able to use GarageBand Digital Audio Workstation Software,
in conjunction with the Helix Board 18 FireWire MKII.
12 HELIX BOARD 18 FIREWIRE MKII