General Tracing Techniques For All Applications - Beha-Amprobe Locator Serie Guia De Inicio Rapido

UAT-600-EUR Underground Utility Locator Series

General Tracing Techniques for All Applications

Locating with the Receiver
1. Turn the Receiver on by pressing the
power button for two seconds. Select the
desired locating frequency. Hold the Receiver
vertically.
2. Adjust the sensitivity, using
the bar graph reading begins to show
movement. The sensitivity control should be
near maximum sensitivity.
1
2
2
3. Keeping the Receiver vertical and in front
of your body, walk across the area to be
checked in a grid pattern.
until
Flag points
where signal is
detected