Tool Care And Service; Declaration Of Use; Operation Features; Dimensions - Desoutter ESP-CA Serie Manual De Instrucciones

measures reduce the risk of starting the tool
accidentally.
Store idle tools out of reach of children and other
untrained persons. Tools are dangerous in the
hands of untrained persons.
Check for misalignment or binding of moving
parts, breakage of parts, and any other condition
that may affect the tools operation. If damaged,
have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
Use only accessories that are recommended by
the manufacturer for your model. Accessories
that may be suitable for one tool may become
hazardous when used on another one.

1.6. Tool care and service

Tool service must be performed only by qualified
repair personnel. Service or maintenance
performed by unqualified personnel could result
in a risk of injury.
Only experienced and qualified personnel
(authorised electricians) are entitled to open and
have access to the inside of the controller. To
eliminate the risk of electric shock, the inside of
the controller shall not be serviced until at least
one minute has elapsed after switching off the
controller.
In order to eliminate the risk of electric shock
and damage to components, the controller
MUST be switched off prior to any tool change.
When servicing a tool, use only identical
replacement parts. Use of unauthorised parts or
failure to follow Maintenance instructions may
create a risk of electric shock injury.
05/2020

2. DECLARATION OF USE

Controller to be used exclusively with SLC
electric screwdrivers. No other use will be
permitted. For professional use only.
To reduce risks of accidents, any
person who uses, installs or repairs
this tool, changes the accessories
or works in its proximity should read
these instructions beforehand.
This module should be grounded.
Do not use this module in explosive
atmospheres.
Do not use the module without its
protections.

2.1. Operation features

- Transformer: 110/230 V AC – 50/60 Hz
- Voltage: 40 V
DC
- Power: 200 VA
- Fuse: 3.15 A
- Construction class: Class 1
- Weight: 4.0 kg

2.2. Dimensions

6159932380
Issue no: 05
1 2 5
7 / 296