English
5.8 - Buzzer mode
● To enter this mode, press "Arrow up" (7) and
"Arrow down" (8).
● Select one of the following modes:
On The buzzer will be on during the screw
fastening, when the job is complete and
when the operation is NOK.
OF The buzzer will beep when the operation
is NOK.
EF The buzzer will be on when the job is
complete.
FF The buzzer will be on when the job is
complete and when the operation is NOK.
5.9 - Lock mode
5.9.1 - Software lock
● To enter this mode, press "arrow up" (7) and
"Select" (10).
● Select one of the following modes:
LC To lock the controller.
Un To unlock the controller.
5.9.2 - Hardware lock
● Turn the key (2) to lock or unlock the
controller (HL). The padlock will be displayed
accordingly.
When both locks are on, the hardware
lock (HL) is displayed first.
02/2017
9 / 228
6159933610_05
Series: A