Protecting The Environment - Black and Decker HP9048 Manual Del Usuario

ENGLISH
Warning! While rewinding the tape, avoid letting it jump back.
To remove the tape measure (8), press the release button

(15) and take the tape measure out of its storage.
To restore the tape measure, insert it into the storage and

push until it is fixed.
Accessories
The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the performance
of your tool. By using these accessories you will get the very
best from your tool.
This tool uses screwdriver bits and drill bits with a 1/4" (6.35 mm)
hexagonal shank. Piranha Super-lok accessories are designed
for use with this tool.
Maintenance
Your Black & Decker tool has been designed to operate over a
long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection. z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
8
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries (fig. G)
h
If you want to dispose of the tool yourself, the
battery must be removed as described below and
disposed of in accordance with local regulations.
Warning! Do not short-circuit the battery terminals.
Run the battery down completely.

Remove the screw (16) from the housing.

Remove the battery cover (17).

Pull the battery out and disconnect the wires to remove it

from the tool.
Place the battery in a suitable packaging to ensure that

the terminals cannot be short-circuited.
NiCd and NiMH batteries are recyclable. Take them to any

authorised repair agent or a local recycling station.
Technical data
Voltage
No-load speed
Max. torque
Bit holder
Max. drilling capacity in steel/wood mm 4/6
Weight
Charger
Input voltage
Approx. charging time
HP9048
V 4.8
DC
min 180 - 600
-1
Nm 5.5
1/4" (6.35 mm hex)
kg 0.76
V 230
AC
h 3