Liability And Warranty; Basic Instructions; Warning Notes - ISRI 6860 NTS2 Manual De Instrucciones

Liability and warranty

Failure to follow this instruction manu-
al may result in liability, warranty and na-
tional vehicle's type approval loss. Manufacturer
assumes no liability or warranty for consequent
damages should this manual not be adhered to. Fai-
lure to comply with the instructions provided may
cause serious or fatal injury to yourself and others.
Attention to detail is imperative in order to adjust the seat
to an optimal position for your body. Make sure that all
seat functions work properly and that the seat is not de-
fective. An incorrectly set seat or a wrong seating posture
may have a negative impact on the ergonomics, driver's
body, and operating capacity of the vehicle. Improper
settings of the seat may affect the ability to properly ope-
rate the vehicle in a safe manner to prevent accidents
that may cause serious or fatal accidents.
The seat must be installed, maintained or repaired by
qualified specialists. Maintenance shall be performed by
experienced professionals only. At time of installation, the
regulations of the country of installation, the installation
instructions and operating manual terms, conditions and
instructions of the vehicle manufacturer must be followed.

Basic instructions

●
Taking proper and gentle care of your seat is imperati-
ve for a long lasting lifetime.
●
For your safety, and for the safety of others, the seat
must only be adjusted while seated, when the vehicle
is fully stopped, and while the parking brake is pulled.
●
Before you start driving, the seat must be adjusted
to an optimal position for your body and the correct
seating posture must be taken, particularly when
switching vehicles.
●
Never use a damaged or faulty seat. After an accident
the seat must be replaced.
●
In case of malfunction or defective parts an autho-
rized dealership has to be visited immediately in order
to check, repair, or exchange the seat or its parts. A
shaking seat can indicate, that screws got loose or it
could be a hint for another defect.
●
The following mechanisms must lock audibly into po-
sition; horizontal slides, backrest recline, seat cushion
length, swivel (optional) and tilt. Pull the levers com-
pletely during the whole duration of seat adjustment,
otherwise improper use could damage parts over
time. The control levers must return to their normal
position after adjustments are made.
●
Don't operate several control elements at the same
time.
INSTRUCTION MANUAL ISRI 6860/875
●
Keep hands away from the adjustment mechanism
and suspension system. Failure to follow this may
cause injury to your hand and fingers.
●
Making changes to the seat are strictly prohibited.
Fullfilment of applicable regulations for vehicle's safe-
ty features and type approval might expire. The safety
of driver and others are endangered.
●
Do not place anything - like for example jackets, blan-
kets, pillows or bags - on or over a seat, that has the
heating or ventilation feature. In this case it is also not
allowed to use protective covers.
●
The seat shall not be used as method of ascent while
entering the vehicle. Standing on the seat is not per-
mitted. Doing so can cause damage to the seat and/
or personal injury.
●
Do not adjust the seat to a position where it can con-
tact other components in the cab. Make sure that the
seat is able to oscilate freely in any direction. Otherwi-
se damage could occur to the seat or cabin.
●
Do not block any mechanisms with foreign objects,
like for example bags and boxes.
●
In order to prevent objects from flying and causing
bodily injuries in situations such as sudden braking,
do not place anything on the seat.
●
The seat is designed to hold a maximum driver's
weight of 150 kg, resp. 330 lbs.
15