Braun Exact Power battery EP 15 Manual De Instrucciones página 7

• It is advisable to begin with the highest setting (position «6») and then
reduce the setting until you reach the desired beard length.
• Hold the distance comb with the angled edge against your beard and
guide the trimmer against the direction of hair growth.
• To avoid clogging the distance comb with hair, clean it from time to time
with the brush. Please note that the distance comb can only be taken off,
when the trimmer is turned off.
C Hair cutting
• The hair should be clean, well combed, tangle-free and dry.
• Proceed as described under (B), but using the larger distance comb
(settings approx. 10 / 12 / 15 / 18 / 21 / 25 mm). If you are not used to
clipping hair, begin with a higher setting and then reduce the setting to
avoid cutting more hair than desired. If you want to cut your hair shorter
than 10 mm, we advise to first cut it with the larger distance comb down
to 10 mm and then use the smaller distance comb for the desired length.
• Use a slow and controlled movement. Do not force the appliance through
the hair faster than it can be cut.
• In between, shake or blow off the hair. If too much hair is caught in the
distance comb, remove and clean it. Please note that the distance comb
can only be taken off, when the trimmer is turned off (position «0»).
Keeping your trimmer in top shape
D Cleaning and care
• After each use, take off the distance comb and slightly shake or brush
hair from the beard trimmer and the distance comb.
• Press the release buttons (2b) to lift off the cutter system. Using the
brush, clean the cutter system and the inside of the trimmer.
• Then click the cutter system back to original position by pushing forward.
Subject to change without notice.
This product conforms to the EMC-Directive 89/336/EEC.
At the end of the product's useful life, please dispose of it at
appropriate collection points provided in your country.
All manuals and user guides at all-guides.com
7