Battery Type; Intended Use - Stanley FATMAX SFMCMW2653 Traducido De Las Instrucciones Originales

English
Charge STANLEY FATMAX battery packs only
with designated STANLEY FATMAX chargers.
Charging battery packs other than the
designated STANLEY FATMAX batteries with a
STANLEY FATMAX charger may make them burst or
lead to other dangerous situations.
Do not incinerate the battery pack.

Battery Type

The SFMCMW2653 operates on 54V battery packs.
For optimum results, use: SFMCB6025, SFMCB605, SFMCB6075
Refer to Technical Data for more information.
Package Contents
The package contains:
1 Lawn mower
1 Grass Collection Bag
1 Safety Key
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any
use of such marks by STANLEY FATMAX is under license.
Other trademarks and trade names are those of their
respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Beware of sharp blades. Blades continue to rotate after
the motor is switched off. Remove disabling device
before maintenance.
Beware of flying objects. Keep bystanders away from
the cutting area.
Directive 2000/14/EC guaranteed sound power.
98
Do not expose to rain.
10
The blades will continue to rotate after the
machine is switched off.
Date Code Position (Fig. A)
The date code , which also includes the year of manufacture,
38
is printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
ON-OFF switch box
1
ON-OFF button
2
Safety key
3
Handle
4
Bail handle
5
Handle locks
6
Handle brackets
7

Intended Use

This lawn mower has been designed for professional lawn
mowing applications.
DO nOT use under wet conditions or in presence of flammable
liquids or gases.
This lawn mower is a professional lawn care appliance.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
ASSEMBLY

DANGER: To reduce the risk of serious personal
injury, turn unit off, remove safety key, and
remove battery pack before assembly, making any
adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
Adjusting Handle Height (Fig. B)
The mower is shipped in storage mode. You will need to adjust
the handle to operating position before continuing.
1. To unlock the handle
4
handle locks 90°. The handle locks are located on both
6
sides of the handle as shown in Fig. B.
2. Raise the handle to operating position.
3. Locate the three handle detent holes
handle brackets as shown in Fig. B.
7
4. Adjust the handle to the position that best fits the operator
and lock the handle in place by twisting the handle locks
back 90° and allowing the handle locks
desired detent holes.
Handle storage detent
8
holes
Battery port cover
9
Cut height adjust lever
10
Rear door cover
11
Grass collection bag
12
Grass collection bag
13
handle
Upper carrying handle
14
from storage position, twist the two
located on the
34
to snap into the
6