Technical Data; Noise/Vibration Information; Declaration Of Conformity - BTI SB 1100 E Manual Original

4 Lock-on button for On/Off switch
5 Insulated handle
6 On/Off switch
7 Thumbwheel for speed preselection
8 Gear selector
9 Button for depth stop adjustment
10 Insulated auxiliary handle*
11 Depth stop*
12 Chuck key*
13 Key type drill chuck*
14 Screwdriver bit*
15 Universal bit holder*
16 Allen key **
* The accessories illustrated or described are not
included as standard delivery.
**Commercially available (not included in the delivery
scope)

Technical Data

Impact Drill
Art. No.
Rated power input
Output power
No-load speed
– 1st gear
– 2nd gear
Rated speed
– 1st gear
– 2nd gear
Impact frequency at no-load
Rated torque (1st/2nd gear)
Speed preselection
Right/left rotation
Keyless drill chuck
Fully automatic spindle lock-
ing (Auto-lock)
Safety Clutch
Spindle collar dia.
Maximum drilling diameter
(1st/2nd gear)
– Concrete
– Brickwork
– Steel
– Wood
Chuck clamping range
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries, these
values can vary.
2 609 932 785 • 28.9.10
SB 1100 E
9032225
W 1100
W 630
-1
min 0 – 900
-1
min 0 – 3000
-1
min 580
-1
min 1900
-1
min 51000
Nm 9.6/3.2
mm 43
mm 22/13
mm 24/16
mm 16/8
mm 40/25
mm 1.5 – 13
kg 2.9
/ II

Noise/Vibration Information

Measured sound values determined according to
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 95 dB(A); Sound power
level 106 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Drilling into metal:
2
a =5.6 m/s , Uncertainty K =1.5 m/s
h
Impact drilling into concrete: Vibration emission value
2
a =14.6 m/s , Uncertainty K =1.8 m/s
h
Screwdriving without impact: Vibration emission value
2
a <2.5 m/s , Uncertainty K =1.5 m/s
h
Tapping: Vibration emission value a
Uncertainty K =1.5 m/s
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the
product described under "Technical Data" is in con-
formity with the following standards or standardization
documents: EN 60745 according to the provisions of
the directives 2004/108/EC, 2006/42/EC.
Vibration emission
2
,
2
,
2
,
<2.5 m/s
h
2
.
English | 27
value
2
,