Yamaha Clavinova CVP-98 Manual De Referencia página 8

Troubleshooting
Problem
The desired chord cannot be recog-
nized or output by the Auto Accom-
paniment.
The maximum of 60 songs cannot
be recorded.
Some tracks do not played back
when playing back data.
* If a "Hardware Error!" message appears in the display when turning on the power, con-
tact your local Yamaha dealer immediately, since this indicates some sort of internal dam-
age to the instrument.
7
CVP-98/96/600
Downloaded from: http://www.usersmanualguide.com/
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The keys are not being played cor-
rectly.
The keys are not being played ac-
cording to the selected Auto Accom-
paniment type.
The memory capacity is full because
the playing time of one or more
songs is long, or many functions
were used.
Playback of the track(s) is set to off.
Cause
Refer to the "Fingering Chart"
(page 36 in this Manual).
Check the Auto Accompaniment
type, and play the keys according to
the selected type. (See page 56 in
the Owner's Manual.)
Delete unnecessary songs (page 138
in the Owner's Manual) or record to
a new disk.
Set playback for the non-sounding
tracks to on. (See pages 91 and 94
in the Owner's Manual.)
Solution