Reviewing Test Results - Fora 6 GTel Manual De Instrucciones

Result
120
Jan-29 2017
Glucose strip QC
Please remove
test strip
Note:
• The meter will detect the difference between control
solution and blood samples automatically. It will
automatically mark the result as a control solution test with
"QC" display.
• For the Total Cholesterol and Uric Acid control solution
tests, tap «QC» to save the results on the «QC» tag.
• Control solution test results are stored in the memory.
• The control solution range printed on the test strip vial or
individual foil pack is for control solution use only. It is not
the recommended range or reference values.
• Refer to the Maintenance section for important information
about your control solutions.
Out-of-range results:
If you continue to get results that fall outside the range
printed on the test strip vial, it means that the meter and
strips might not be working properly. Please contact your
local customer service or place of purchase for assistance.
12:25 pm
mg/dL
100-165

Reviewing Test Results

Your device stores the 1000 most recent test results along
with respective dates and times in its memory. To enter the
meter memory, tap the Logbook icon on the Main Page.
To review all test results, do the following:
1. Tap Logbook icon on the Main Page
The first reading you see is the last test result along with
date, time and the measurement mode.
2. Press or repeatedly to review other test results stored
in the device.
To review the day-average test results, do the following:
1. Tap AVG tab
Your 7-, 14-, 21- day average results measured in No Tag
mode will appear on the display. Tap
28-, 60-, 90- day average results.
2. Tap Before Meal/After Meal to review 7-, 14-, 21-, 28-,
60- and 90- day average results stored in each measuring
mode.
3. Exit the meter memory
Press the Home button to return to the Main Page.
EN-13
or to review