Install The Unit - Homewerks Worldwide HTR-REV02-L Manual Del Usuario

Model #HTR-REV02-L
www.homewerksww.com
All manuals and user guides at all-guides.com
Instructions
26. To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray,
construction dust, etc. off power unit.
27. Provide a separate 20 AMP circuit.
28. This product is designed for ceiling installation only. DO NOT MOUNT THIS PRODUCT IN
A WALL.
29. Install in ceiling only, at least 6" from any wall.
30. For greatest efficiency, install heater so heat is directed toward tub or shower area. Avoid
directing toward walls or windows.
INSTALL THE UNIT
Installing the fan body in an existing building requires an accessible area (attic or crawl
space) above the planned installation location and existing duct and wiring.
CAUTION: Check area above installation location to ensure that:
1. Duct work can be run and the area is sufficient for proper ventilation.
2. Wiring can be run to the planned location.
3. No wiring or other obstructions can interfere with installation.
1. Inspect duct work and wiring before proceeding with installation.
2. Before installation provide inspection and future maintenance access at a location that will not
interfere with installation work.
3. Remove ceiling section using dimensions provided on page 4. Be careful to cut hole exactly. If
hole is too big the fan grill will not hide it.
4. Determine the distance between your joists.
Fig. 1
5. Refer to Fig. 2 to mount the fan between the joists.
Long
wood
screws
Short machine screws
Fig. 2
Item# 398999
6
Effective/Rev. date: March 15, 2012