Menu - STAUFF SPG-DIGI Manual De Instrucciones

Display
Battery
REC
x10
3.2

Menu

The following settings are configured in the menu:
■
Switch automatic shutdown on/off
■
Set the measuring unit (bar, mbar, PSI, kPa, MPa)
■
Adjust filter setting (damping)
■
Delete saved measurement data (data logger version only)
■
Display serial number
Press the ZERO/MENU key for 2 s to activate the menu.
Press the ZERO/MENU key again to select the next function.
Press the RESET/OK/START-STOP key to save the function - the
SPG-DIGI switches to the actual value display.
V1.0/01/20
Description
Displays the battery status (5 segments).
Flashes when data logging is active (only with data
logger version)
Display value (actual value display and MIN/MAX
display) x10.
Layout and function
13