Kohler Prologue K-3593 Guia De Instalacion página 6

1
Insert the drawer
and hold in position.
4
Bracket
Screw Nut
Loosely thread the nuts to the screws.
4. Install the Drawer
If the slides are already installed, proceed to the "Complete the Drawer Installation" section.
Insert the drawer assembly into the cabinet opening and hold in position.
Position the drawer so that it will clear the cabinet when opened. Note the slot that aligns with the
holes in the slide.
Remove the drawer from the opening.
Remove the slides from the drawer.
NOTE: Slides may need to be extended to allow access to the slide mounting holes.
Insert the screws through the slide and the appropriate slot in the brackets.
Loosely secure the slides to the brackets with the washers and nuts.
Close the slide assemblies. You may need to pull the screws to allow the slide assembly to close.
1068810-2-A
2
Drawer
Slide
Washer
Bracket
Hole
Slide Track
3
5
Slide
Assembly
Screw
Head
6
Note the slot and
hole alignment.
Slot
Remove the
drawer slides.
Pull screw to
allow the slide
assembly to
Bracket
close.
Kohler Co.