Human Touch pc300 Manual De Instrucciones página 5

get ready
ATTACH THE HEADREST FRAME
1. Remove the two screws from the backrest frame.
2. Insert the ends of the backrest frame into the chair frame (Fig.8).
3. Using a Phillips-head screwdriver, replace the two screws to secure the backrest frame (Fig.9).
Fig.8
SECURE THE CANVAS AROUND
THE HEADREST FRAME
1. Pull the canvas firmly toward the headrest.
2. W rap the upper flap around the headrest frame,
then secure it to the canvas using the hook-and-
loop fasteners (Fig.10).
IMPORTANT:
Be sure you pull the canvas as tight as possible,
as this is important for proper chair performance.
humantouch.com
Fig.9
Fig.10
6
ATTACH THE BODY PAD
1. S lide the headrest end of the body pad over the headrest frame (Fig.11).
2. Slide the footrest end of the body pad over the footrest frame (Fig.12).
3. Standing at the footrest, grasp both sides of the body pad and lift it upward (Fig.13).
4. Push the body pad firmly toward the backrest, then lower it to the seat canvas, securing it using
the hook-and-loop fasteners (Fig.14).
Body pad
Headrest frame
Fig.11
Fig.13
ATTACH THE HEAD PILLOW
Attach the head pillow straps to the headrest straps
by joining the hook-and-loop fasteners. Adjust the
head pillow height for maximum comfort (Fig.15).
Fig.12
Smooth the seat portion of the pad
toward the backrest with your hand.
Fig.14
Fig.15
7