Adjusting The Feet; Illumination Lamp; Door Open Warning; Transportation Of The Product - Beko CN160120 Manual De Instrucciones

Installation
used without grounding in accordance with the
local regulations.
• Electrical connection must comply with
national regulations.
• Power cable plug must be within easy reach
after installation.
• The voltage and allowed fuse or breaker
protection are specified in the Rating Plate
which is affixed to interior of the product. If
the current value of the fuse or breaker in
the house does not comply with the value in
the rating plate, have a qualified electrician
install a suitable fuse.
• The specified voltage must be equal to your
mains voltage.
• Do not make connections via extension
cables or multi-plugs.
B
WARNING:
must be replaced by the Authorized
Service Agent.
WARNING:
B
failure, it should not be operated
unless it is repaired by the
Authorised Service Agent! There is
the risk of electric shock!

3.4. Adjusting the feet

If the product stands unbalanced after
installation adjust the feet. Taking help from
someone to slightly lift the product will facilitate
this process.
B
WARNING:
Product must not be plugged in when
adjusting the feet. There is the risk of
electric shock!
Turn the front feet to balance the product. The
corner where the foot exists is lowered when
you turn in the direction of arrow and raised
when you turn it in the opposite direction.

3.5. Illumination lamp

Do not attempt to repair yourself but call the
Refrigerator/ User manual
Damaged power cable
If the product has a
First unplug the product.
9 /30EN
Authorized Service Agent if the illumination
lamps do not go on or are out of order.
The lamp(s) used in this appliance is not
suitable for household room illumination. The
intended purpose of this lamp is to assist the
user to place foodstuffs in the refrigerator/
freezer in a safe and comfortable way.

3.6. Door open warning

(This feature is optional)
An audio warning signal will be given when the
door of your product is left open for 1 minute.
This warning will be muted when the door is
closed or any of the display buttons (if any) are
pressed.

3.7. Transportation of the product

1. Unplug the product before transporting it.
2. Clean the interior of the product as
recommended in the "Maintenance and
cleaning" section.
3. Secure the shelves, accessories, crisper and
etc. in the product by adhesive tape before
repackaging it.
C
Packaging must be tied with thick
tapes or strong ropes and the rules of
transportation printed on the package
must be followed.
C
Original packaging and foam
materials should be kept for future
transportations.
A
Packaging materials are dangerous
for the children. Keep packaging
materials
in a safe place away
from reach of the children.