Replacement Parts - Cosatto NITTY GRITTY SUPA GO Manual Del Usuario

Visual language Key:
Parts:
P1: Pushchair
P2:Hood
P3: Raincover

Replacement Parts:

The replacement parts shown below are available for your product. For UK & Ireland
customers, order through our website: http://www.cosatto.com/service-centre/spares
For customer outside UK & Ireland, contact information for your local distributor can be found on
http://www.cosatto.com/stockists
If you require any further assistance, please contact us at cuddle@cosatto.com
S1: Foam handle
S2: Handle pip
S3: Hood
S4: Seat unit
S5: Backrest board (Set)
Fitting & Operation information:
Please refer to the following diagrams:
Pushchair
Brake
Front swivel lock 4- Applying
Handle
Harness
S6: Harness
S7: Raincover
S8: Front wheel
S9: Footrest
S10: Wheel cap
1- Opening
Release auto lock (1) then pull the handles upwards (2).
Press down on the locking lever (3) until a 'Click' is heard and the secondary lock bar
(4) is locked in place.
Check the chassis has locked in place.
2- Applying
3- Releasing
5- Releasing
6- Raising
7- Lowering
8- Opening
9- Closing
10- Adjusting the strap length
Slide the strap adjustor to suitable length (1, 2 & 3).
11- Adjusting the shoulder strap position
12- Removing
Push shoulder strap retainer through backrest (1).
Push crotch strap retainer through seat (2).
S11: Basket
S12: Rear wheel
S13: Autocatch