bosal 003-938 Manual De Instrucciones página 4

Pay special attention to lead colours in vehicle, whether they match suitable light functions. Colours may differ in
different vehicle models.
6. Draw connection bunch with grey, grey/white, brown, black/green and grey/red leads (in 13-polar set
additionally blue/red) to right tail lights:
a) Connect quick joint to white lead in vehicle running to right indicator, connect black/green lead from
connection bunch to quick joint,
b) Connect quick joint to yellow or black/yellow lead in vehicle running to right standing lights, connect
grey/red lead from connection bunch to quick joint,
c) Only in 13-polar set.
Connect quick joint to white lead in vehicle running to right reversing light, connect blue/red lead from
connection bunch to quick joint,
7.
Draw connection bunch with grey, grey/white, black/white, grey/black and black/red leads to left tail lights:
a) Connect quick joint to blue/black lead in vehicle running to left indicator, connect black/white lead from
connection bunch to quick joint, ,
b) Connect quick joint to yellow or yellow/black lead in vehicle running to left standing lights, connect
grey/black lead from connection bunch to quick joint,
c) Connect quick joint to red lead in vehicle running to left stop lights (it is located in bunch at the back wall of
vehicle), connect black/red lead from connection bunch to quick joint.
8.
Cut fog grey lead of fog lights in vehicle bunch in a proper place (in 3-door vehicles on the left side, in 5-door
vehicles on both sides). Put a jacket shrinking under high temperature on each cut lead in such a way, that the
end is located in the middle of the jacket's length and then heat the jacket on the lead using either a singeing
machine or a lighter, clip quick joints at the end of leads. Connect quick joint assembled on a lead running fog lights
switch to grey lead in connection bunch. Connect quick joint assembled on lead running to fog lights to grey/white
lead from connection bunch.
9. Connect brown and white/brown 2,5mm
fix the eyelet terminal with sheet metal screw; do not secure the hole with anti-corrosion agent).
10.
Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue, yellow, white/brown leads) is provided for expanded socket
functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the
following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
NOTE:
(13 pol) lead to earth (e.g. drill a 3mm diameter hole, and connect and
2
part no. 014-169
part no. 015-069