Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Draw end of bunch with 6-input connection from the left side inside vehicle to fuse base:
a) Assemble fuse base and turn it around. There is a suitable connection marked with "K" at the back side.
Connect the bunch connection in this place.
Draw remaining blue and grey leads in 7-polar set and black/red, blue and grey in 13-polar set to vehicle feeder
7.
leads of fog and reversing lights:
a) Cut fog lights lead in an easy accessible place in lead bunch. Put a jacket shrinking under high temperature on
each lead end in such a way, that the end is located in the middle of the jacket's length and then heat the jacket
on the lead using either a singeing machine or a lighter,
b) Clip quick joints at the end of leads,
c) Connect quick joint assembled on lead running to fog lights switch to blue lead from connection bunch,
d) Connect quick joint assemble on lead running to fog lights to grey lead from connection bunch,
e) Only in 13-polar set
Clip quick joints at feeder lead of reversing lights and connect in to black/red lead from connection bunch.
8.
Connect white (7-polar), white and white/black (13-polar) leads to earth (e.g. drill a 3mm diameter hole, and con-
nect and fix the eyelet terminal with sheet metal screw; do not secure the hole with anti-corrosion remedy).
Trailer power supply:
9.
Only for 13-polar version. 3-input housing (red/blue, yellow, brown/green leads) is provided for expanded socket
functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the follo-
wing parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
part no. 014-169
part no. 015-069
Publicidad
