Taurus Liquafruits Manual De Instrucciones página 7

English
Juicer
Liquafruits
Dear Customer
We wish to thank you for having
decided to purchase an appliance
from the TAURUS range.
Its technology, design and
functionality, along with the factor of
its complying with the very strictest
quality standards, ensure you will
be totally satisfied with it for a long
time.
The materials used in packing this
appliance are backed by a system
of collection, classification and
recycling (Green Point). If you wish
to dispose of them you can use the
appropriate public containers for each
type of material.
Description
A Presser
B Protective cover
C Filter
D Upper casing
E Fastening clasps
F Juice receptacle
G Pulp receptacle
H Motor casing
I Stop/start switch
J Pilot light
Safety recommendations and
precautions
-Please read this instructions
pamphlet carefully before using your
appliance.
-Unpack it completely and check it is
in perfect condition and functioning
well, as any factory defect or damage
caused during transport is covered by
the TAURUS guarantee.
-This device has been specifically
designed to be used by adults. Do not
allow children to handle it.
-Do not use the device if the rotating
sieve is damaged.
-Check that the voltage, stated on the
device plaque, is suitable for your
home.
-The manufacturer is not liable for
any damages incurred as a result of
improper use of the appliance.
How to use
Instructions for use
-Place the juice and pulp receptacles
in position, making sure that they are
in the same position as shown in the
diagram.
-Place the protective cover in the
correct position, as indicated by the
arrows.
-Once you have checked that the
fastening clasps are in place, turn the
device on using the stop/start switch.
NB: if the clasps are not in place
correctly, the device will not start.
-The pilot light will then light up.
-Introduce the chopped fruit or
vegetables into the opening in the
protective cover.
-Press gently using the presser.
-The juice and pulp will be
automatically separated. The juice
will fall into the juice receptacle
and the pulp will fall into the pulp
receptacle.
-Do not let the motor run for more
than 2 minutes at a time. Turn the
device off and leave to cool down
for at least 2 minutes, otherwise you
could damage the motor.
-Once juicing has finished, leave the
motor running for a few seconds to
drain the remaining juice.
-Turn the device off using the stop/
start switch and unplug it.