Setting The Temperature; Power Cuts - Kingfisher H10MGF5U Manual Del Usuario

STOPPING THE ECO PROGRAMME
- Press the ► or ◄ button to select another
mode (see § Mode selection),
or
- Press and hold 3 seconds on OK then press
► to display StoP.
- Press OK to validate.
ECO-CITIZEN
This function set the Comfort temperature at 19°C and the ECO tempera-
ture at 16°C. It can be used in conjunction with one of the programmes to
optimize energy savings.
- Select the menu Cons (see following chapter).
- Press and hold for 3 seconds on OK to select the menu ECO.Ci menu.
- Press ► or ◄ to start or stop the function ; the € icon indicates that is on.
- Press OK to validate.
The Eco-Citizen function is deactivated when the Comfort or Eco tempera-
ture is adjusted manually.
This function is only accessible after the radiator power is declared (see §
Consumptions).
PRECAUTIONS FOR USE

SETTING THE TEMPERATURE

- The heating power is maximal as long as the setpoint temperature has
not been reached. Programming the setpoint temperature to the maximum
temperature possible, will not heat the room quicker.
- Wait for a few hours for the room temperature to stabilise before adjusting
the temperature setting.
- Switch the appliance off when you air the room.

POWER CUTS

- Following a power cut, the radiator will automatically restart with all of the
settings and programs used before the cut (if it was in operation before the
cut, it will stay on after the cut).
- The programmer clock starts from the time the cut began. This means
that the time and day could be misaligned.
- On start-up, the software version and hours of use is displayed for 30
seconds.
10
Quick start