Setting The Time; Weekly Programming - Kingfisher H10MGF5U Manual Del Usuario

Secondary programmes and functions

SETTING THE TIME

- Press MENU to access the menus ; the menu
Hor (Clock) is displayed.
- Press OK to enter this menu.
- Press + or – to set the day of the week : d1 =
Monday, d2 = Tuesday,...., d7 = Sunday.
- Press ► to display the time, then + or – to set
the time.
- Press ► to display the minutes, then on + or – to set the minutes.
- Press ► to display of time setting, then on + or – to set the time automati-
cally or manually.
- Press OK to validate.
- Press MENU to exit the menus.
icon permanently flashes in programme mode (PrOGr), this in-
. If the
dicates that the time is offset following a power cut. It is flashing as a time
has not been set.
. Following a power cut, the appliance will automatically restart with all of
the settings used before the cut (if it was on or off before the cut, it will stay
on or off after the cut).
. Automatic time setting is not possible outside France.
. Select manual time setting if daily automatic time setting is incorrect.

WEEKLY PROGRAMMING

The time must be set before programming.
A different programme can be set for each day of the week.
These 7 programmes are different from the 4 pre-programmed Eco-pro-
grammes.
- Press MENU to access the menus.
- Press ► to select the PrOGr menu.
- Press OK to enter this menu.
1- Press ► or ◄ to select the day of the week
to programme : d1 = Monday, d2 = Tues-
day,...., d7 = Sunday.
2- Press + to select the first time period from
00:00 to 01:00, which appears transparent.
3- Press ► or ◄ to select the time period to
modify.
4- Press + to program the Comfort tempera-
ture (visible black square) or the Eco temper-
Example :
setting
the time
period from 10:00 to 11:00
11
Quick start