Locking The Buttons; Mode Selection - Kingfisher H10MGF5U Manual Del Usuario

LOCKING THE BUTTONS

- Press and hold for 3 seconds on the MENU button to lock and unlock the
buttons ; the icon
The button is never locked.

MODE SELECTION

- Press the ► or ◄ button to select one of the following modes :
- CONFO (Comfort) : Constant temperature that can be set
- ECO (Economy) : Constant Temperature that can be set
- FrF (Frost protection) : Temperature at 7,5°C not adjustable.
- PrOGr (Programme) : Programmes recorded beforehand for each
- FIL.PI (Pilote Wire) : unused on this model of heater.
- Press the OK button to validate the mode : the mode and the temperature
are displayed alternatively every 3 seconds.
SETTING OF THE COMFORT MODE TEMPERATURE
The Comfort and ECO temperatures are
set separately.
The Comfort mode temperature range is
between 13,5°C and 30°C and can be ad-
justed in increments of 0.5°C. If limited, re-
duce the ECO temperature, as the Comfort
temperature is always higher than the ECO
temperature.
- Select CONFO (Comfort) mode and validate by pressing OK :
- Press the + or - to button to increase or reduce the setpoint temperature ;
the temperature flashes.
- Press OK to validate the selected Comfort temperature.
indicates that it is locked.
between 13,5°C and 30°C.
between 13°C and 29,5°C.
day of the week (see § Weekly programming).
8
Quick start