Oregon Glaze Manual Del Usuario página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
The water tank must be cleaned every day in order to extend the product life.
Clean the product once a day after using it. Likely, if the product has not been
used for a long period of time, clean it before using.
1.
Switch off the product, remove the DC plug from the main body and drain the
water tank.
Refer to P.8 "How to drain the water tank"
Water tank must be drained according to the Drainage Direction.
·
Caution
Do not allow the air outlet to get wet.
·
2. Wipe the water tank gently with a cloth which contains mild detergent.
Mild detergent in kitchen must be used for cleaning the water tank. It is very dangerous if
hydrochloric acidic, acidic or enzymatic detergent is used and left inside the water tank as
toxic gas may be generated.
3. Clean the Ultrasonic Vibration Plate with a cotton swab which contains mild
detergent.
If oil is attached on the Ultrasonic Vibration Plate, the product may not operate normally.
Take out the Ultrasonic Vibration Plate Cover (P.10) and clean the plate carefully.
4.
After washing the water tank, clean up the water inside with a soft cloth and dry
water tank completely.
Caution
Do not allow the air outlet to get wet when washing the water tank.
Care
  
12
Ultrasonic Vibration
Plate Cover
Ultrasonic Vibration Plate

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Oregon Glaze

Tabla de contenido