Oregon Glaze Manual Del Usuario página 3

Do not stab or insert any sharp, metal such as
needle, pin into the product of mist outlet, air inlet
and air oulet. It may cause electric shock or injury.
Do not block the mist outlet, air inlet and air outlet.
Disturbance of normal operation may cause
malfunction, overheating or failure.
Do not touch the body part right after the operation.
Be aware of the high temperature of mist or water
in the water tank.
Do not remove the ceramic cover or the lid of the
water tank while the product is operating. Water
and essential oil may spill out, damage the
surrounding stuff and cause failure.
Exchange tap water in the water tank every day
and make sure the water tank is clean. There may
be water stains or mineral attachment if the water
tank is not cleaned properly and may cause poor
performance. Moreover, mould or bacteria may
cause stingy smell and harmful to health. Be aware
of allergies caused by mould and bacteria
Caution
Use tap water in room temperature. Mould or
bacteria may grow easily if mineral water,
alkaline-ion water, well water, or filtered water is
used.
Use essential oil that is 100% extracted from
plant naturally. Do not use synthetic fragrance.
Add 2-3 drops of essential oil into 80mL water, do
not add too much since it may cause failure.
Do not place the product near any electrical
compliance such as computer, TV, piano, painted
furniture and special processed wall surface.
Touching or spilling of mist or water may cause
failure or damage of properties.
Do not place anything on the product or place the
product somewhere unstable. It may fall down
and cause injury.
Drain and keep the water tank dry if water may
be frozen. Ultrasonic vibration plate may be
damaged if the internal structures get frozen.
3