Oregon Glaze Manual Del Usuario página 6

Pour 80ml tap water into the water tank.
4.
The volume of the water tank is 80ml, do not add
water over the water level indicator.
Mist cannot generate if water is over the
·
water line.
Caution
Do not allow DC plug and USB cable to get wet.
·
Do not tilt the product while adding water. It may cause
※
failure if water entered internal part via air outlet.
The product must be switched off when adding water.
※
Spilling of water may cause failure.
※ Do not add water when the product is operating. High
temperature vapor and water may blow out.
Remove the cover and lid before adding water with a
※
container. Do not add water directly into the mist outlet
without taking out the lid or place the water tank directly
under the tap. Spilling of water may cause failure.
Do not add cold water since the mist generation would be
※
affected.
5. Add 2-3 drops of essential oil into the water tank
Essential oil must be added when the water tank
·
is full (80ml).
Do not add essential oil directly onto the
Caution
ultrasonic vibration plate.
Do not add too much essential oil.
·
It may cause failure.
※ Essential oil is sold separately. Prepare 100% extracted
Natural Essential oil.
6.
Return the lid and the cover to their places.
Make sure there are no gap between the body part
and the lid, also between the body part and the cover.
There may be leakage between the gaps.
Do not add
water directly
under the tap
6
Water line
Drainage Direction
Drainage Direction
2-3 drops of
essential oil
Drainage Direction
lid cover