Kohler ACRYLIC BATHS K-1132 Guia De Instalacion página 4

2. Recommended For Drop-In and
Sunken Model installations:
D. INSTALL ROUGH PLUMBING
Locate the rough plumbing
according to the roughing-in
dimensions. Cap the supplies, and
check for leaks.
3. PREPARE BATH
A. INSTALL TILING-IN BEAD -
APPLICABLE DROP-IN
MODELS ONLY
We recommend an optional tiling-in
bead for the side of the bath that
contacts the wall. This bead prevents
water from seeping between the
bath and the wall.
Install this bead now. Refer to the
installation instructions packed with
the tiling-in bead.
B. PARTIALLY INSTALL DRAIN
Install the drain to the bath
according to the drain
manufacturer's instructions.
B
1007260-2-
Recess Installation
Peninsular Installation
4
Corner Installation
Sunken Installation
Kohler Co.