Kohler ACRYLIC BATHS K-1132 Guia De Instalacion página 6

C. INSTALL PLUMBING
CAUTION: Risk of
concealed leakage. Make sure
a watertight seal exists on all
bath drain connections.
Connect the drain to the trap.
Install the faucet valving according
to the manufacturer's instructions.
Strap the supply connections to the
stud framing. Open the hot and cold
water valves, run water into the
bath, and check for leaks. Cap the
outlets.
Provide access to the plumbing
connections for future plumbing
maintenance.
D.ATTACHREMOVABLEPILLOW
CAUTION: Risk of product
damage. Do not submerge the
pillow underwater or use it as a
seat cushion.
NOTE For best attachment to the
:
bath surface, moisten the back
surface of the pillow at the suction
cup locations.
Clean the bath surface of any soap
film or oils. Suction cups are located
on the back side of the pillows.
Position the pillow as desired above
the waterline by pressing down
firmly with the heel of your hand.
Check to make sure the pillow is
attached firmly to the bath.
Detach the pillow by lifting it off the
bath surface.
INSTALL OPTIONAL APRON
5.
To install an optional apron, refer to
the installation instructions packed
with the apron.
B
1007260-2-
6
Connect
Here
Pillow
Suction
Cup
Kohler Co.