Select Batch Counting; Menu Function - Hilton Europe Beeplo b6100 Manual De Usuario

5.6 Select batch counting

When you need a batch counting, press "BAT" key, then 100 is displayed on the
initializing window and the machine enters batch counting mode, the batch counting number
is 100.Each time when you press "BAT" key,100,50,20,10 and "---" will be displayed in turn
repeatedly. If the LCD window displays"---", the batch counting mode is disabled. If you
press or hold "+1/+10" key, the batch number will be added with 1 or 10 automatically. The
batch number can be selected in the range of 1~200.Put the banknotes on the hopper. After
detecting, while reach the batch number, the machine will stop automatically. If you want to
repeat the batch counting, you only need to press the "RESET" key, the machine will repeat
the above operation.

6. Menu Function

Press the "MODE" key for 2 seconds to enter the setting mode, display window will
display like below:
Time set Setting the time
Detector Setting the detecting grade of current currencies
Adjust Setting the basic length value of adjustment, the default value is
1(156mm USD)
Sleep Time： Setting the sleep time(5,15 or 30 minutes)
OCR mode: Setting ON/OFF of the serial number identification function
Click the "CUR" key to select the option continuously.
Click "ADD" key to change the parameter.
When reach the Time Set option, presses "ADD" to enter into time set interface. It will display
like below:
Press "CUR" to switch the value that need modify. Click "ADD" key (+) and "MODE" key
(-) to change the parameter of the time.
Press "MODE" key for 2 seconds to save the change and exit the setting mode
automatically.
12