Software Upgrade - Hilton Europe Beeplo b6100 Manual De Usuario

8. Software Upgrade

1. Turn off the detector first and then connect the detector to the PC with provided
download cable.
2. Press "RESET" and "Power key" at the same time to turn it on. "Ready to download...Boot
ver1.0" will be displayed on the screen and the detector enters the main board download
mode.
3. In the Main board download mode, double click the download software《Multi-Target
Programmer V4.0.exe》on PC. Refer to the following figure.
4. Click "Load File" button and then select ".EUP" file of main board. After selecting the file,
the interface will display like below:
5. After click "Yes", the length of the file will be displayed on the "File Size".
15