Publicidad
Note：
If the weather station is used with 2 or 3 transmitters, press "CH" button shortly to display channel
1/2/3 or cyclic display.In cyclic display,the channel will be changed every 5 seconds.
Deleting Sensors / clearing channels：
Press and hold the "CH" button for 3 seconds to clear the current channel to register.
Buttons：
MODE
HISTORY
The DCF reception icon with full signal strength will appear on screen if the reception of
atomic time is successful.
In normal display mode, press the "+" and "-" button at the same time to start the DCF
searching.
The tower icon will stay solid when the station has received the DCF signal.
No tower icon displayed.The station was unable to receive a signal at this time.
Resposition the station for better signal reception and wait an overnight automatically
receive hours：daily 1:00,2:00,3:00,4:00,5:00.DCF automatically receive,at any time once
receive 3,4,5:00 no longer receive the same day.
Only if unit receives summer time,it will display the "DST " icon.
If there is no signal or too much interference the receiver will only be on for 2 minutes.
If the signal is good it may catch a signal in about 2-3 minutes.
If the signal is weak it will try to catch a signal for up to 10 minutes.
In the normal display,hold the "+" and "-" button at the same time or hold the " CH" button to
stop the DCF searching.
Settings：
Press and hold the button "MODE" for 3 seconds to enter the setting mode
1.
24HR will flash, press "+" or " –" to select the 24HR/12HR format.press "MODE" button to
2.
confirm and continue.
°C will flash, press "+" or " –" to select the °C/°F format, press "MODE" button to confirm and
3.
continue.
HPA will flash, press "+" or " –" to select the HPA/ InHg format, press "MODE" button to confirm
4.
and continue.
00 will flash, press "+" or " –" to select the time zone press "MODE" button to confirm and
5.
continue. For example, use 00 for Germany and -01 for UK.
0 will flash, press "+" or " –" to select the hour press "MODE" button to confirm and continue.
6.
00 will flash, press "+" or " –" to select the minutes, press "MODE" button to confirm and
7.
continue.
Year will flash, press "+" or " –" to select the year, press "MODE" button to confirm and
8.
continue.
Month will flash, press "+" or " –" to select the month, press "MODE" button to confirm and
9.
continue.
Date will flash, press "+" or " –" to select the date, press "MODE" button to confirm and
10.
continue.
Language will flash, press "+" or " –" to select the language, press "MODE" button to confirm
11.
and continue.
+
-
EN 4
CITY
CH
SNOOZE
Publicidad
