Drive Medical PreserveTech 12011KD-1A Manual De Instrucciones página 2

assembly instructions
1. Remove contents from carton.
2. Lay transfer bench upside down on a flat surface.
3. Attach leg with the large suction cup (marked "A") by
depressing the brass push pin and inserting into the
receptacle with the matching "A". Repeat for second
leg (Figure 1).
figure 1
4. Attach leg with small rubber tip (marked "B") by
depressing brass push pin and inserting into the
receptacle with matching "B". Repeat for second leg
(Figure 2).
figure 2
5. Turn transfer bench right-side-up. Attach armrest
by depressing brass push pins and sliding into the arm
receptacle on the side of the bench. Make sure the
arm arcs outward, not inward (Figure 3).
figure 3
6. To assemble backrest, insert pole into backrest
support by depressing push pin and sliding into
receptacle. Repeat for second pole (Figure 4).
figure 4