Publicidad
Idiomas disponibles
Idiomas disponibles
Table of system programming codes
Programming
Function description
code
bit 0
door lock activation time
activation upon call from internal station (1)
bit 1
bit 2
door lock activation with
bit 3
not used
call numbers displayed with initial letter (3)
bit 4
bit 5
activation of personalised initial screen (4)
bit 6
deactivation of ACI FARFISA and activation of personalised text
deactivation/activation of tone generator
bit 7
(1) This function allows the internal stations to press the door lock button, start a conversation with the external station (in case
of more external stations in parallel the function must be activated on one external station only) and activate the door lock
by pressing the button again.
(2) This functions allows for quicker door lock activation by pressing rather than dialling the code 00+
+ password +
.
(3) If the installation is divided into multiple raisers the number of thousands as a letter for easier identification (letters from A
to J). The internal station receives a 4-digit number. For example: by dialling A001 the internal station called is the internal
station with code 1001. If you select and send a single digit the push-button panel enters three zeros automatically (for
example: press 3 +
(4) You can alternate "ACI FARFISA" with the personalised text (see "personalisation of display initial text").
Tone table
0
1
2
0
1
2
0
1
2
0
1
2
(2)
to display C000 and send 3000).
3
4
5
Free
3
4
5
Hold-on -
3
4
5
End of conversation
Confirmation
3
4
5
-
The internal station you have called is ringing
The exchanger has put the push-button panel on hold
-
10 seconds before conversation ends
-
Sending of call, door lock opening during conversation and
acknowledgement of door lock code
Value entered with buttons
= 0
= 1
3 sec
6 sec
NO
YES
NO
YES
-
NO
YES
NO
YES
NO
YES
NO
YES
. For example: press
13
Mi 2293/1
Publicidad
